34
Manual – MOVI-PLC® advanced Controller Remote Maintenance via ORA11B
6
General technical data
Technical Data
6
Technical Data
6.1
General technical data
6.2
Technical data of ORA11B modem
General technical data of ORA11B
Operating voltage
DC 10 - 60 V
Power consumption in standby mode
2 W
Power consumption when connection is active
3 W
Input level
High level: 4 - 12 V
Low level: 0 - 1 V
Current consumption of an active input against
GND (in5 V)
Typically 0.35 mA
Switch output, max. switching voltage
DC 30 V / AC 42 V
Switch output, max. current load
DC 1 A / AC 0.5 A
Weight
300 g
Dimensions (width x height x depth)
70 mm x 110 mm x 75 mm
Temperature range
0 °C - 55 °C
Maximum permitted humidity
95 % non-condensing
Protection class
Housing: IP40
Screw terminals: IP20
Technical data of ORA11B modem
Communication interface for incoming and out-
going PPP connections
Analog 56k modem
Transmission rate
56 kB/s
Supported data compression standards
Fax Class 1/2 MNP 2/3/4, V.42, MNP 10,
MNP10 EC, MNP 5, V.42bis, V.44
Supported transmission standards
V.32bis, V.32, V.23, V.22, V.22bis, V.21, V.34+, V.34,
(for 56 version also V.90 and V.92) Bell Norm,
103/212, LAPM
4 port Ethernet switch
10/100 MBit/s full/ half-duplex autosense
Automatic wiring recognition "Crossover" or "Patch"
P
i
f
kVA
Hz
n
