SEW-Eurodrive MGFAT1-DSM-C/PE, Operating Instructions Manual, Page: 82 / 124

9
Technical data and dimension sheets
General technical data
Operating Instructions – MOVIGEAR
®
classic
82
9.2 General technical data
MGF..1-DSM-C
Climate class EN 60721-3-3; class 3K3, non-condensing, no condensation
Storage temperature ϑ
F
-25 °C to +70 °C (different to class 3K3)
Ambient temperature ϑ
A
-25 °C to +60 °C (different to class 3K3)
1)
From +40 °C, factors that lead to a reduction in power must be taken
into account (see chapter "Derating for increased ambient tempera-
ture").
Proof of mechanical
strength According to EN 61800-5-1
Degree of protection IP Standard: IP65 in accordance to EN 60529 (housing closed and all
cable entries sealed)
Operating mode S1, DB (EN 60034-1)
Type of cooling Natural cooling to DIN 41751 and EN 61800-5-1
Installation altitude h Up to h ≤ 1000 m without restrictions.
The following restrictions apply to heights ≥ 1000 m:
• From 1000 m to max. 4000 m:
– I
N
reduction by 1% per 100 m
Over 2000 m only overvoltage category II, external measures are re-
quired for overvoltage category III.
Overvoltage categories according to EN 60664-1.
Required preventive meas-
ures Grounding the device
1) Observe the permitted temperature range of the oil to be used (see chapter "Lubricant table")
9.3 Current carrying capacity of terminals
Current carrying capacity of terminals
Motor terminals X2 Max. 24 A
25805134/EN – 07/2018