SEW-Eurodrive MGFAT1-DSM-C/PE, Operating Instructions Manual, Page: 50 / 124

4
Mechanical installation
Tightening torques
Operating Instructions – MOVIGEAR
®
classic
50
4.11.2 Cable glands
Tightening torques
Tighten the EMC cable glands optionally supplied by SEW‑EURODRIVE to the fol-
lowing torques:
Screw fitting Part
number Contents Size Outer
cable dia-
meter Tighten-
ing
torque
EMC cable glands
(nickel-plated brass) 18204783 10 pieces M16 × 1.5 5 to 9 mm 4.0 Nm
18204805 10 pieces M25 × 1.5 11 to
16 mm
7.0 Nm
EMC cable glands
(stainless steel) 18216366 10 pieces M16 × 1.5 5 to 9 mm 4.0 Nm
18216382 10 pieces M25 × 1.5 11 to
16 mm
7.0 Nm
The cable retention in the cable gland must withstand the following removal force of
the cable from the cable gland:
• Cable with outer diameter > 10 mm: ≥ 160 N
• Cable with outer diameter < 10 mm: = 100 N
Example
The following figure shows an example. The number and position of the cable entries
depends on the ordered variant.
21524164747
25805134/EN – 07/2018