4
Mechanical installation
Shaft-mounted gear unit with keyway
Operating Instructions – MOVIGEAR
®
classic
30
4.5.2
Disassembly notes
WARNING
Risk of burns due to hot surfaces.
Serious injuries.
•
Let the devices cool down before touching them.
INFORMATION
For information on the SEW‑EURODRIVE assembly/disassembly kit, see chapter
"Technical data and dimension sheets / Design notes".
The following description only applies when the drive is assembled using the
SEW‑EURODRIVE assembly/disassembly kit (see previous description, points 2B or
2C).
1. Loosen the retaining screw [1].
2. Remove parts [2] to [4] and, if applicable, the spacer tube [5].
[6]
[1]
[2]
[3]
[4]
[5]
21513725835
[1]
Retaining screw
[4]
Retaining ring
[2]
Lock washer
[5]
Spacer tube
[3]
Washer
[6]
Customer shaft
3. Insert the forcing washer [8] and the fixed nut [7] from the SEW‑EURODRIVE as-
sembly/disassembly kit between the customer shaft [6] and the retaining ring [4].
4. Re-install the retaining ring [4].
25805134/EN – 07/2018
Summary of Contents for MGFAT1-DSM-C/PE
Page 2: ...SEW EURODRIVE Driving the world...
Page 123: ......