Step 11.
Step 12.
Step 13.
Install Small Drawer Base Panel (#12-5).
From above, fit and attach Small Drawer Base Panel
(#12-5) between the two sides and into the back of
the
Small Drawer Front Panel (#12-1). Use Screw B
(#21) to
tighten.
Note:
Do not fully tighten any one screw until all
screws
are partially screwed in.
Install Small Drawer Back Panel (#12-4).
Attach the Small Drawer Back Panel (#12-4) to the
rest
of the assembled drawer. Use Screw B (#21) to
tighten.
Once you have the first Small Drawer
assembled, repeat
Steps 11-13
to assemble the
other two Small Drawers.
Once completed, you
should have three Small Drawers.
Install Small Drawer Side Panels
(#12-2 and #12-3).
Fit and attach Small Drawer Side Panels (#12-2 and
#12-3)
one at a time into the back of the Small
Drawer Front
Panel (#12-1). Make sure the Drawer
Side Panels are
placed in all the way making contact
with the rear of the
Small Drawer Front Panel
(#12-1). Line up the screw
holes and use Screw B
(#21) to tighten them.
1
2
UltraHD® 4-Drawer Rolling Cabinet (Model No. 20205B)
*NOTE: We recommend using TWO people to assemble the
cabinet
.
Summary of Contents for UltraHD UltraGuard 20205B
Page 2: ...1 2...
