13
142 x 208 mm
∙
If the appliance is left empty for long
periods, turn it off, clean it, and leave
the door open to prevent mould from
developing within the appliance.
∙
This appliance is designed for storing wine only.
∙
To prevent the risk of personal injury or damage to the
unit, it must only be transported while in its original
packaging. Two people are required for unpacking and
installation.
∙
The rollers on the underside of the appliance are
intended for short-distance handling only.
∙
Caution:
Keep any packaging materials well away from
children – these are a potential source of danger, e.g. of
suffocation.
∙
The power cord should be regularly examined for any
signs of damage. In the event of such damage being
found, the appliance must no longer be used.
∙ To avoid the risk of fire, do not place any electric
appliances on top of the unit. Do not place any liquid
containers on top of the unit: this will prevent any
leaking or escaping liquid damaging the electrical
insulation.
∙
Do not cover, modify or remove the pull-out wooden
shelves. Always ensure sufficient air circulation within
the appliance.
∙
Do not lean or put undue weight on the shelves, door
etc.
∙
Never pull out more than one wooden shelf at a time, as
this may cause the appliance to tip over.
∙
Protect the inside of the unit at all times from open
flames and any other sources of ignition.
∙ Remove the plug from the wall socket
-
in case of any malfunction,
-
during cleaning,
-
before maintenance or repair work is carried out.
∙
When removing the plug from the wall socket, never pull
on the power cord; always grip the plug itself.
∙ We reserve the right to introduce technical modifications.
Familiarisation
1. LED lighting
2. Top wooden shelf (3+1 bottles)
3. Middle wooden shelves (2x5 bottles)
4. Partition for the top and bottom temperature zones
5. Bottom wooden shelves (2x5 bottles)
6. Bottommost wooden shelf (2+2 bottles)
7. Adjustable support feet
8. Door seal
9. Glass door
10. Handle
11. Pull-outs for wooden shelves
12. Control panel
Control panel
1. On/off button
2. Decrease/increase temperature in the top zone
3. Top zone temperature display
4. Bottom zone temperature display
5. Decrease/increase temperature in the bottom zone &
switch between degrees Celsius/Fahrenheit
6. Interior lighting