9
Before Installation
Operation and Storage Requirements
Do not install the device in the proximity of heat sources, such as
heating pipes, heaters, furnaces or other devices that radiate heat.
Mount the device in such a way that it is protected against moisture.
To prevent fire or electric shock, never allow liquids to enter the unit.
The uninstalled product must be stored in dry and well-ventilated
rooms, without extreme temperature fluctuations. Heat sources and
aggressive active substances may not be stored in the proximity of
the device. The required storage temperature is -24°F to 140°F. The
device must be stored in the complete packaging, as delivered.
Installation
Easy to use standard mounting systems are available and can be
specified or recommended by Séura. Install the product in a way
that it is fixed properly and take care that children are not exposed
to danger. Please take extra care during installation, avoid impacts.
Before cabling your monitor, check that the power is off. To avoid
any possibility of electric shock, always connect your equipment to
properly grounded outlets. Use of power cords or adapters other
than those provided may cause fire or malfunction. Place this
product as close to the power socket as possible. Leave enough
space to insert and remove the power plug on demand. Even if
you power off the product with your remote control, power is still
present unless the power cord is unplugged. The device may only
be operated with the provided power adapter. The rated voltage
is indicated on the product label. The device is factory-set to the
optimal operating voltage (see Technical Specification). Use only
power cords and plugs that are suitable for your local electrical
outlets. Do not install the power cord in a way that could obstruct
a walkway. Ensure furthermore that the cable is not clamped and
that it cannot be pulled out accidentally from the power adapter.
Do not install the power cords in the proximity of heating elements
and never place heavy items on the cable or power adapter. Do not
modify or repair the power cords.
NOTE
Make sure the power source circuits are properly grounded. Use
the supplied power cord in order to connect it to the power source.
If your installation requires a different power cord, be sure to use
an officially approved power cord displaying the mark of the safety
agency that defines the regulations for power cords in your country.
Please consider that the AC outlet for the power adapter is placed
within reach of the Séura Television Mirror and should be easily
accessible in case it needs to be powered off.
Install the unit in an environment where the operating ambient
temperature will not exceed 60°C / 124°F. Ensure that your
installation complies with your national and local safety rules. Any
servicing, adjustment, maintenance or repair must be performed only
by service-trained personnel.
Ensure the power outlet is installed in an accessible location, to
access it easily in case of a defect.
It is highly recommended that at least
three (3) people assist in the installation
of the mirror.
To avoid damage to the mirror, only
transport it in a vertical position.
Transporting the product horizontally may
permanently warp the mirror.
Aside from shipping inspections, do not
handle or remove your mirror from the
packaging until it is ready to be installed.
