14
Turn on Settop M1
When you received SETTOP M1 for the first time, it is necessary to set a minimum setting. You can follow
this setting Step by Step:
Configuring via Wi-Fi
●
Step 1:
○
Connect Power Cable (
PN. 310655-v3
) in COM1
○
Connect Total Station cable (
PN: 310605
) in COM2
●
Step 2:
Press the
ON/OFF
button and wait until the OS Boots Up. Wi-Fi LED flashes modulate (see diagram in
section 1.4
) when searching for a network and Wi-Fi LED flash 2 times per second
●
Step 3:
With a PC, smartphone (Android), iPhone or iPad with Wi-Fi Access, press “
search network”
. It will appear
as one network called “
Settop M1 SN”
(SN is a serial number).
●
Step 4:
Enter Network password “
settopm1
” (in lowercase).
●
Step 5:
Open your Internet browser (it supports Google Chrome and Safari) and key in IP address
192.168.2.2
●
Step 6:
○
User name is:
admin
○
Password:
The password defined for the first time that access to web (or m1)
Configuring via PHONE
●
Step 1:
○
Connect Power Cable (
PN. 310655-v3
) in COM1
○
Connect Total Station cable (
PN: 310605
) in COM2
●
Step 2:
Press the
ON/OFF
button and wait until the OS Boots Up. Phone LED flashes constantly (one or two times
per second) (see diagram in section 1.4
).
●
Step 3:
With a PC, iPhone or iPad, open your Internet browser (it supports
Google Chrome and Safari)
and key in
static
IP address assigned
at SIM card.
●
Step 4:
✔
User name is:
admin
✔
Password:
The password defined for the first time that access to web (or m1)
SETTOPSURVEY, S.L. Bofarull 14, 08027 Barcelona (Spain) Phone: (+34) 93 340 05 73 Fax: (+34) 93 351 95 18
