SES SAT2 User And Installer Manual Download Page 6 | Manualshive

Page: 6 / 19

SES SAT2 User And Installer Manual Download Page 6

S A T 2 U S E R / I N S T A L L E R G U I D E V 1 . 4

SAT2 Programming

How To Program a SAT2

he SAT2 can be programmed with the optional hand programmer
(OptSatPrgm), or it can be programmed with an ordinary Touch-Tone

telephone. The SAT2 is designed to answer after 3 rings, (this is

programmable) and prompt (with a beep) for the 4 digit password. SAT2

comes from the factory with all 4 digits set to 7 (7777 is the password).

To program a SAT2, from a Touch-Tone Phone, get into programming mode by:

Calling the SAT2’s phone number.

After 3 rings, SAT2 answers and beeps once.

From your phone, key in 7777

If the password is valid you will hear two beeps. If the password is not

valid, SAT2 will immediately hang up.

If you do not key in the password within 10 seconds, SAT2 hangs up.

Once the password is entered, if more than 1 minute goes by with out a key
being pressed on your phone, SAT2 will hang up.

Any programming key press error will cause SAT2 to send a long tone
(Error Tone) instead of 2 beeps (Command Accepted).

How To Get Out of Program Mode.

Use your Touch-Tone™ phone to key in 99. Then SAT2 can be used
immediately.

Example: To exit program mode, key in 99.

If you simply hang up, the SAT2 can not be used for at least one minute.

Installers Note

«
...
4
5
6
7
8
...
»

Summary of Contents for SAT2




















Reviews:

No comments