SES SAT DBPX, User/Installer Manual

Page: 14 / 36

SAT DBRX V1.0 INSTALLATION AND USER GUIDE
10
SAT INFORMATION
SELECT 1 - 7
SAT ID =
4.1
SAT INFORMATION
Pressing "1" (after entering the password) will show the choice
at left.
In this menu selection you may:
A. Add or edit SAT information.
B. Find a location.
C. Show the number of SATs used.
D. Print all ID records.
E. Print all location records.
F. Show all SATs.
4.1.1 ADD / EDIT SAT INFORMATION
Press "1" on the SAT INFORMATION menu. You will be
prompted for the SAT ID as shown at left:
If a mistake is made while keying in the SAT ID, press the "0" and
the "#" simultaneously to move back one space. From a terminal or
keyboard, press the back arrow key.
Enter the SAT ID. It will be between one and four digits
depending on the system parameters (see section 4.2 Pg. 16).
After the desired SAT ID has been keyed in, press the " ". From a terminal or keyboard, press the
"Enter" or
7
)-
key.
4.1.1 A DELETING A SAT ID
To delete a SAT ID, key in the ID number then press "#" followed by " ". This also will erase
all data associated with that ID number, such as the location, name, phone number, address, city and
notes. From a terminal or keyboard, press the "DEL" (delete key) followed by the "Enter" or
7
)-
key.
4.1.1 B DELETING A FIELD
To delete a part of a SAT ID record, such as a phone number, location or city, go to that field
by pressing the " " key. When the desired field has been reached, key in "0", then " " from the
keypad. This will delete the data in that field, but not any of the other fields associated with the SAT
ID record. From a terminal or keyboard, press the "Enter" or
7
)-
key until the desired field has been
reached. Key in "0", and then the "Enter" or
7
)-
key.
NOTE: IF YOU PLACE A "0" IN THE FIRST POSITION OF A LOCATION, IT
WILL DELETE ALL DATA ASSOCIATED WITH THAT SAT ID.