Operation
Pulse and Direction Using Single-Ended Signal
12
Application Note
3.
In the Gear Input pane, select the option
Controller I/F Opto-Isolated
and
Pulse & Direction (P&D)
.
Step 2 – Confirm Digital Inputs 5 and 6 are Set to Pulse and Direction
1.
Go to Drive Configuration >
Digital IOs
screen.
2.
Make sure digital input 5 is set to
17-Pulse signal
.
3.
Make sure digital input 6 is set to
18-Direction signal
.
Note
: Selecting Controller I/F Opto-Isolated and Pulse & Direction (P&D) in
the Motion screen (Step 1) automatically sets the definitions for digital
inputs 5 and 6.
Summary of Contents for CDHD Series
