Servomex SERVOTOUGH Oxy, Operator'S Manual

Page: 120 / 145

108
© Servomex Group Limited. 2020 01910001B_8
Registe
r
Name Comments
1149 Flow temp fault Temperature fault on flow sensor
A.12 System setup mapping
System data will be available with read
-
write access in blocks of holding registers. This data can be read
with func�on code 03 and writen with func�on codes 06 and 16.
Register Name Comments
Clock
1 Year 0-99
2 Month 1-12
3 Date 1-31
4
Hour 0-23
5 Minute 0-59
6
Second
0-59
Calibration set up
7
Linked 0=No, 1=Yes.
Switch input
8
Switch input func�on 0=Disabled, 1=Remote cal, 2=Auto val.
A.13 Transducer setup mapping
The
transducer will provide read
-
write access to various setup data in blocks of holding registers that
can be read with func�on code 03 and writen with func�on codes 06 and 16.
Each register provides 2 bytes of data so it takes 2 registers each to store a 4 byte floa�ng point
measurement value.
A block of 100 registers is allocated for each transducer to provide the means of supplying the
transducer related setup data as follows: