Servomex NanoTrace DF-760E, Instruction Manual

Page: 113 / 182

User Interface DF-760E 109
7.7.6 Power Up Default
Figure 123: Power Up Default
The Power Up Default SubRoutine enables the user to determine the default states during
analyzer power up. The power up states are useful because they determine whether, for
instance, the sensors are protected from ambient air contamination or whether they are
configured the best way for rapid station to station transfer and measurement.
Use the NEXT key to move from field to field. Use the up and down arrows ( and )
to move between the selections within the field. When done use the NEXT key to move to
the Accept field and hit the Enter key. Pressing the ESC at any time will make no
changes and will return to the main data display
Figure 124: Power Up Default Screen
NOTE: If the analyzer auto-reboots due to a system error 20006, the power-up defaults are
ignored and the analyzer returns to the mode of operation found immediately before the
error. This reboot action is identified in the system error log as an error 222. See page 60
for additional information on system error codes.