AquaXact Issue 1.0
© Servomex Group Limited 2017
17
6
Technical specification
The protection, accuracy, operation and condition of the equipment may
be impaired if the device is not installed in accordance with the
requirements of this and other sections of the manual.
Instrument
6.1
Dimensions:
Includes sensor and connector
Diameter x length
31.5 x 136 mm
1.24 x 5.36 inches
Mass:
175 grams
Enclosure:
Stainless steel
Operating temperature:
-22 to +158 °F (-30 to +70 °C)
Mechanical connections:
5/8”-18 threads.
Adapters for other threads are available.
Electrical connections:
Industrial Standard 9.4mm 7-pin connector IP65
Cable:
The digital seven conductor cable or the two
conductor 4-20mA cable must be shielded to meet
CE requirements; for ambient temperatures above
60 °C make sure that wiring temperature rating
exceeds the maximum expected ambient
temperature.
Maximum digital cable length:
200 metres.
Power requirements:
13 Vdc (min) to 33 Vdc (max), the instrument draws
4 - 20mA depending on measured dew point
Input resolution:
0.1 ºC dew point
Engineering units:
Factory programmed:
°C dew point
°F dew point
ppmV
Controls:
Digital RS485 with AquaXact Controller
Outputs:
Analog and digital outputs are available:
4-20 mA drawn by the instrument from the
