Servomex 07931001B, Operator'S Manual

Page: 89 / 221

07931001B revision 6 © Servomex Group Limited. 2020
75
5.3 Data Log
Figure 5-3: Data log sequential menu
Basic data log
The Basic data log function enables the measurement value and transmission value
to be recorded and stored for future recall. The log can be exported to internal
memory or SD card.
An exported data log contains, for each acquisition, the date/time, concentration,
transmission, and if present, pressure and temperature as obtained from mA input.
Note:
Please note, these values should be discarded if mA inputs are
not enabled.
Note:
It is recommended that this file is saved over a period of 1 hour
after first installation to monitor stability
Basic Data Log internal file should be exported (see below)
once the data logging action has been concluded. This will
allow user to read this file in most available software such as
Microsoft Excel etc.
Hint: Values are separated by semicolons for ease of plotting and analysis.
Hint:
Data log filename is ‘datalog.txt’ on microSD card