Servomex 07931001B, Operator'S Manual

Page: 149 / 221

07931001B revision 6 © Servomex Group Limited. 2020
135
Figure 7-9: Example of mounting / alignment assembly fitting exploded view
1
Transmitter alignment assembly
2
Gasket
3
Receiver alignment assembly
Alignment of the transmitter and receiver alignment assemblies
Do not use the alignment tool if the process flange is hot (> 60°C), or if
the process contains potentially hazardous gases.
Only use the light source supplied by Servomex with the alignment tool.
Make sure that there are no dangers from the release of potentially
hazardous gases, for example, toxic, flammable, asphyxiant or hot
gases.
Always use adequate eye protection to prevent injury from ejected dust
or dirt and high levels of IR radiation that may be present.
Never look into a live process through the eye piece as this may result in
hazardous radiation exposure and permanent eye damage.