Servomech S.p.A.
01.05.TR.E - Rev. 02 DD (M/Y) 12/19
32
8
LUBRICATION
SERVOMECH acme screw jacks are supplied lubricated, with lubricants indicated in the table below:
SCREW JACK
GEARBOX
ACME SCREW – NUT
ANTI-ROTATION DEVICE
MA 5
Grease (NLGI 00 DIN 51818):
AGIP Grease SLL 00
Grease (NLGI 2 DIN 51818):
SHELL Gadus S2 U460L 2
Also suitable:
ENI Grease NF
CASTROL Tribol GR HT 2
MOBIL Mobiltemp SHC100
MA 10
MA 25
Oil (viscosity at 40°C ASTM D 445: 320 mm/s²):
ENI Blasia S 320
Also suitable:
SHELL Omala S4 WE 320
CASTROL Alphasyn PG 320
MOBIL Glygoyle 320
MA 50
MA 80
MA 100
MA 200
MA 350
SJ 5
Grease (NLGI 2 DIN 51818):
ENI Grease SM 2
SJ 10
SJ 25
SJ 50
Grease (NLGI 00 DIN 51818):
AGIP Grease SLL 00
SJ 100
SJ 150
SJ 200
SJ 250
SJ 300
SJ 350
SJ 400
SJ 600
SJ 800
SJ 1000
Table 8.1 – Lubricants
DO NOT USE LUBRICANTS DIFFERENT FROM THOSE ABOVE MENTIONED.
DO NOT MIX INCOMPATIBLE LUBRICANTS.
IF DIFFERENT LUBRICANT SHOULD BE USED, PLEASE CONTACT SERVOMECH BEFORE PROCEED.
IN CASE OF CUSTOM PRODUCT EXECUTION, THE LUBRICANTS COULD BE DIFFERENT FROM THE
STANDARD ABOVE. TO KNOW THE TYPE OF LUBRICANT PLEASE REFER TO THE PRODUCT CHECK
SHEET SUPPLIED WITH THE PRODUCT.
