SerVision
Embedded Video Gateway System Guide
Appendix A: Viewing Video on a CCTV Monitor (TV-Out)
226
Figure 267: Clear screen
Note:
To return to the
Edition
menu, select
Done
.
Configuring Display Options
The default display options are defined in the unit’s configuration utility. You can modify these settings using the
Config
menu, and you can save the new settings in the unit’s configuration.
The
Config
menu provides access to three screens:
Picture Params screen:
Sets the brightness and contrast of each camera
TV-Out Params screen:
Sets the loop interval for the full-screen display that switches from camera to
camera, activates and deactivates the screen saver, and sets the timeout for the screen saver
OSD Params screen:
Configures the on-screen display (OSD) of the camera name and of the timestamp for
recorded video
To open the Config menu:
In the main monitor menu, select
Config
.