SerVision
Embedded Video Gateway System Guide
Appendix A: Viewing Video on a CCTV Monitor (TV-Out)
221
Figure 261: Sensor Selection screen
To select the video excerpt by time:
1. In the
Time-Selection
screen (figure 260), under
From
, select the date and time of the beginning of the
excerpt, and under
To
, select the date and time of the end of the excerpt, as follows:
Select the value you want to modify (e.g., in the figure above, under
From
, select “12” if you want to
change the minute value of the start time), or select the right and left arrows
to scroll through all of the
values. A box appears around the selected value.
Select the up and down arrows
as necessary to modify the selected value.
The duration of the selected time period appears under
Duration
.
Note:
To close the screen and return to the
Edition
menu without adding any new items to the edition, select
Done
.
2. Select
Add
. The excerpt is added to the edition. The
Time Selection
screen closes, and the
Edition
menu
appears. The item counter at the top of the
Edition
menu indicates that a new item has been added to the
edition. For example, it this is the second item that was added,
(2 items)
appears at the top of the menu.