W A S H I N G
M A C H I N E
14
SM1602
HOW TO DO A WASH
IMPORTANT
You should run an initial wash cycle without laundry to remove residues of factory-applied grease
from the drum and tub. We suggest a rinse and spin programme with a small amount of detergent.
NOTE:
The detergent dispenser drawer and housing should be periodically cleaned to prevent a build up of
detergent and fabric softener.
Fig 19
Fig 20
Wash powder and conditioner compartment
The detergent dispenser is designed to automatically flush detergents and
additives into your appliance. It is divided into three compartments (Fig 19),
which are as follows:
1
Pre-wash and bio powders
2
Main washing powder
3
Fabric conditioners
Load the laundry
Open the door by pulling the catch outwards. Load the items to be washed
one at a time and close the door (Fig 20).
Add the detergent
Open the detergent drawer by pushing the lower section of the drawer front
Measure the required quantity of washing powder and pour it into the deter-
gent compartment (Fig 21) or directly into the drum of the appliance if you
are using a wash ball. (See section on Detergents and Additives).
Add the conditioner
Pour the conditioner into compartment 3 (Fig 22) but do not exceed the MAX
level.
Close the drawer gently. If you slam the drawer, it could cause the condi-
tioner to enter the appliance prematurely.
Fig 21
1
2
3
Fig 22
