Model Number: OFD-SER533-BLK
Emerge Executive Chair
1. To Adjust Seat Height:
While seated, lean forward and reach under the right side of
the chair to find the handle. Lift the handle and raise your body
up slightly to allow the chair to rise to the desired height. To
lower the seat, lift the handle while applying more weight
downward on the seat. The chair will descend until the handle
is released or the chair reaches the bottom position.
2. To Operate Tilt Lockout:
While seated, reach under the right side of the chair to find the
height adjustment handle. Pull the handle all the way out (away
from the gas lift) to allow the chair to tilt backwards. To lock the
chair in the upright or vertical position, sit upright and push the
handle in towards the gas lift.
3. To Adjust Tension on the Tilt Mechanism:
Reach under the front center of the chair, grasp the round knob
and turn counter- clockwise to make the tilt mechanism firmer
(stiffer). To make the tilt mechanism less firm, turn the knob
clockwise until the desired resistance is found.
4. About the Air Cushion:
While seated, the open-air contours of the cushion
which is designed to breathe and flex, can
dynamically provide continuous support by
connecting with your body’s natural movement.
The air cushion conforms to the curve of your spinal
cord and are intended to relieve your back from
stress. The Air
TM
chair has been shown to help the user
achieve neutral posture. Neutral posture has been shown to
reduce back strain and increase long term seated comfort.
*Provides constant support as you lean back and twist
*Flexible lumbar pivots and conforms following your
movement
*Continuous proper lumbar support help keep the
body in an optimal working position for maximum
comfort
Note: It is not intended to diagnose, treat, cure or prevent any
disease. If pain increases, please discontinue use.
5. 360° Swivel:
360° seat swivel.
OPERATING INSTRUCTIONS