www.SereneLifeHome.com
Care Taker Ground Hunting Blind
SLHT49
Patented Dual-floor Kick-Outs, Water Repellent and UV Treated,
Includes Carrying Bag
WARNING:
• FOR YOUR SAFETY BE SURE TO READ ALL INSTRUCTIONS CAREFULLY.
•
THIS HUNTING BLIND USES FIRE RESISTENT MATERIAL. THIS MATERIAL IS NOT FLAME PROOF.
•
DO NOT ALLOW ANY HEAT OR OPEN FLAMES TO COME IN CONTACT WITH THE MATERIAL OF THIS HUNTING BLIND.
•
DO NOT USE HEATER IN BLIND. UNVENTED FUMES CAN CAUSE SICKNESS OR DEATH.
•
DO NOT SHOOT FIREARM THOUGH THE SHOOT THROUGH SCREENS. THE MUZZLE FLASH COULD IGNITE THE
SCREEN MATERIAL.
•
DO NOT USE EXPANDABLE BROADHEADS WITH SHOOT-THROUGH SCREENS. THE BLADES MAY OPEN PREMATURELY.
USE FIXED BLADE BROADHEADS ONLY
•
DO NOT ALLOW CHILDREN TO PLAY WITH THIS BLIND WITHOUT ADULT SUPERVISION.
•
NEVER COVER YOUR FACE WITH THE BLIND MATERIAL, IT CAN CAUSE SUFFOCATION AND DEATH.
•
REMOVE ALL GROUND STAKES BEFORE ATTEMPTING TO FOLD UP BLIND. GROUND STAKES MAY TEAR THE BLIND OR
CARRYING CASE.
SETUP:
STEP 1: Unpack and locate hubs
Remove the blind from carrying case and lay it on the
ground. Locate hubs.
STEP 3: Push out roof
Locate the hub for the roof in the center of the hubs. Be
sure hubs for walls not opened are close together. While
holding hub of wall already opened in one hand, firmly
push the roof hub outward with your other hand until it
pops open. Swing wall overhead and remain inside blind.
Zippered pouch
Carrying
case
Wall hubs
Roof hub
(center)
Wall hubs
STEP 2: Push out wall
Locate any one of the four wall hubs around the roof hub
in center. Hold the hub in one hand and place your foot
on the other hubs. With your other hand, grab the center
stake loop between the poles at the edge of the fabric.
Push the hub out firmly until the wall pops open.
STEP 4: Push out remaining walls
Now pop out the remaining three walls by firmly pushing
the hubs outward from the inside of the blind.
Stake loop
Wall hub
Step
Push
Swing finished wall
over head and stay
inside
Push out roof hub
from inside
(inside sideview)
(inside view)