Data Pro
P/N 10029355 Rev AE
Operation Manual
Page 53 of 92
8.7.8 LCD Timeout
This feature disables the LCD to save power and improve LCD life. If this feature is enabled, and the
timeout has occurred, the LCD will be blank. To see the screen again, touch the LCD to enable the
LCD. When the LCD is off, the Data Pro will continue to run in the background normally.
8.7.9 Network
Configure the network before use. The use may configure both network interfaces along with the FTP
server. The Ethernet ports support DHCP or Static IP addressing. The network can be configured to
support a DNS server. When editing any of the data,
a small “*” asterisk will appear on the tab that has
been edited. This shows that the configuration has been changed but not saved. When all changes
have been completed,
press the “Save” button to save the settings to the Data Pro. There may be a
small delay after pressing save as the network interfaces are configured and restarted.
The Data Pro has a Secure FTP server that will allow remote data downloading. Default mode is FTP
disabled
. To use this feature click the “Enable FTP” check box and set the password as desired then
press “Save”. The user can then connect to the Data Pro via the IP address of either of the network
with an FTP client that supports “Secure FTP” or “SFTP”. After FTP configuration, data may be
downloaded to a remote FTP device. Data
CANNOT
be deleted via the FTP process.