Solenoid diaphragm pump
Series R/RS 204.1
Operating Instructions
6
www.sera-web.com
Subject to technical modifications!
TA 416
Rev.
11 en
04/2013
3.5
Safety conscious working
The safety instructions specified in this operating manual, the
national regulations for accident prevention, the safety regula-
tions for the pumped medium valid at the place of installation
as well as internal working-, operating-, and safety instructions
of the owner are to be observed.
3.6
Safety instructions for the owner /
operator
Leaking pumped media must be disposed off in such a way
that any danger to persons and hazards to the environment
are excluded. The legal regulations are to be observed.
Dangers through electrical energy are to be precluded.
3.7
Safety instructions for maintenance-,
inspection and installation work
The owner must ensure that all maintenance-, inspection- and
installation work are exclusively carried out by authorized and
qualified personnel who have read the operating instructions
carefully.
The spare parts used must comply with the requirements of
the respective operating instructions.
All screwed connections and connections may only be re-
moved when the system is not under pressure.
3.8
Arbitrary modification and spare parts
production
Modification to and changement of the pump is only permitted
after previous agreement of the manufacturer. Original spare
parts and accessories approved by the manufacturer increase
safety.
CAUTION !
If non-approved parts are used or if the pump is modified
arbitrarily the manufacturer refuses any liability claims.
3.9
Improper operations
Operating safety of the supplied diaphgram pump is only guar-
anteed if the product is used as intended, according to the de-
scriptions in Chapter 3.10 of these operating instructions.
3.10 Intended use
The
sera
– diaphragm pump is only to be deployed according
to the intended purpose stated in the product description and
the acceptance test certificate.
If the solenoid diaphragm pump is to be used for other applica-
tions, then the suitability of the pump for the new operating
conditions must be discussed with
sera
beforehand!
Criteria for the proper use of the solenoid diaphragm pump
are:
Observe characteristics of the pumped medium (please
see safety- and product data sheet of the pumped medi-
um used
– the safety data sheet is to be provided by the
supplier / owner of the pumped medium)
Resistance of the materials which come into contact with
the pumped medium
Operating conditions at the place of installation
Pressure and temperature of the pumped medium
Voltage supply
3.11 Personal protection for maintenance and
service
In order to avoid risks to health, the provisions of the German
Ordinance on Hazardous Substances (GefStoffV) (§14 Safety
Data Shee) and relevant national safety regulations for the
pumped medium must strictly be adhered to.
In case of an incident pay attention to the following leaking
media:
fluids
vapours
noise emissions (sound level)
Emissions are to be monitored by corresponding monitoring
systems.
CAUTION !
Wear protective clothing, gloves, and a face protecting
and breathing mask.
CAUTION !
Personal protective equipment must be provided by the
owner!
