manualshive.com logo in svg

Sequential PRO 3, User Manual

Share
Download
Sequential PRO 3 User Manual Download Page 19

7

Pro 3 User’s Guide

Sound Banks

Sound Banks

The Pro 3 contains a total of 1024 programs. Banks U1-U4 are user 

banks that can be overwritten. Banks F1-F4 are factory banks that are 

permanent. As shipped, user banks U1-U4 are identical to permanent 

factory banks F1-F4. Each bank has 128 programs (multiplied by 4 

banks = 512 programs each). You can edit the programs of either bank, 

but you can only save them to user banks U1-U4. 

Banks of non-rewritable, permanent sounds are included so that they are 

always available, to be used as is, or as templates for new sounds of your 

own. It’s easy to design a new sound by tweaking an existing one. 

U1

PRO 3 LEAD

P1

Turn to scroll through

User and Factory banks

Turn to scroll through

programs 1-128 in each bank

BANK

PROGRAM

Bank and Program controls

Selecting Programs

Use the 

bank

 and 

program

 knobs to select and recall programs.

To choose a program:

1.  Turn the 

bank

 knob to select the bank you want.

2.  Turn the 

program

 knob to select a program within that bank.

Summary of Contents for PRO 3









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands