manualshive.com logo in svg

Sequential PRO 3, User Manual

Share
Download
Sequential PRO 3 User Manual Download Page 17

5

Pro 3 User’s Guide

Setting Up the Pro 3

Setting Up the Pro 3

Here’s how to get your Pro 3 up and running:

Getting Started:

1.  Plug the power cable into the AC power connector on the back panel of 

the Pro 3.

2.  If you have an expression pedal, connect it to the 

pedal

 jack on the 

back of the Pro 3. If you have a sustain pedal, connect it to the 

foot

-

switch

 jack. 

3.  Turn on the Pro 3.
4.  Connect the 

left

 

and 

right

 audio outputs on the back of the Pro 3 to 

your amp/mixer/powered speakers using unbalanced, ¼ inch audio 

cables. These are the main stereo outputs for the synth. 

5.  Turn up the volume on your amp/mixer/powered speakers.
6.  Turn up the volume on the Pro 3. 
7.  Use the 

bank

 and 

program

 knobs to scroll through the factory sounds. 

You can also use Soft Knob 1 and Soft Knob 2 as well as 

inc

 and 

dec

 

buttons to scroll through the sounds in the currently selected bank.

P1

Pro 3 Lead

U1

Turn to scroll through

User and Factory banks

Turn to scroll through

programs 1-128 in each bank

Bank and Program controls

Each of the factory presets has interesting and useful modulation functions 

programmed into the touch slider and the mod wheel. While you’re trying out the 

factory sounds, play with these performance controls and listen how the sound 

changes. Each preset also has a pre-programmed sequence. To hear it, press the 

play

 button in the 

seq

 section.

Summary of Contents for PRO 3









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands