Sequential PRO 3, User Manual

Page: 140 / 168

128 Appendix D: Calibrating the Pro 3 Sequential
Programs can also be dumped directly from one Pro 3 to another using
the MIDI DIN jack, if the
midi sysex cable
parameter is set to
midi
in the
global
menu.
To send a program or bank to another Pro 3 as a SysEx file over MIDI:
1. Connect two Pro 3 synthesizers together using MIDI cables and the
midi in and midi out
jacks on their rear panels.
2. On both synthesizers, press the
global
button and use s
oft
k
nob
1 to
select
midi sysex cable
, then use Soft Knob 3 to choose
midi
.
3. On the Pro 3 that you want to send the programs to, press the
global
button again to disable it.
4. On the Pro 3 that you want to send the programs from, in the
global
menu use s
oft
k
nob
1 to select
dump prog
,
dump bank
, or
dump all
banks
, depending on which of these you would like to do.
5. Press Soft Button 1 (
dump now
) . The program or bank is exported to the
other Pro 3.
Dumped programs will load back into the same bank and program location in
memory when received by the Pro 3 via MIDI.
Importing Programs and Banks
You can use a MIDI librarian application such as such as SysEx Librar-
ian for Macintosh, or MIDI-OX for Windows to transmit exported
program or banks back into your Pro 3. You will need a computer and an
appropriate software application.
To import a program or bank as a SysEx file over MIDI:
1. Connect your synthesizer to a computer using a USB cable (or MIDI
cable, if you are using a dedicated MIDI interface).
2. Press the
global
button on your Pro 3.
3. Use the s
oft
k
nob
1 to select
midi sysex cable
, then use Soft Knob 3
to choose either
usb
or
midi
, depending on which port you are using to
connect to your computer.