Sequential PRO 3 User Manual Download Page 11

Page: 11 / 168

A Few Words of Thanks

Thank you for purchasing the Pro 3, our latest effort to make the world’s greatest

monosynth. That’s a bold statement, but it’s true. Our biggest pleasure here at

Sequential is trying to outdo ourselves with each new instrument.

In many ways the Pro 3 is the evolution of a concept that started with the classic

Sequential Circuits Pro-One — pack as much power as possible into a compact

footprint and make it sound awesome. In this case, that power comes in threes:

three oscillators, three filters, three LFOs, plus our most powerful sequencer yet.

And there’s plenty of modulation; over thirty-two slots worth, in fact.

Our formula seems to have worked. The Pro 3 doesn’t just sound good, it sounds

amazing. We love this synth and hope you will, too.

So stop reading and starting playing!

Cheers,

Summary of Contents for PRO 3









































































































































































Search results

Summary of Contents for PRO 3

Reviews:

Brands by name

Popular brands

Sequential PRO 3, User Manual

Search results

Summary of Contents for PRO 3

Reviews:

Brands by name

Popular brands