5.1. HOW TO CONFIGURE THE ASTERX-U MARINE FG AS AN RTK BASE STATION USING THE UHF
RADIO
Step 3: Con
fi
guring the UHF radio
The UHF radio can be con
fi
gured in the
‘
UHF
’
window. In the example show in Figure 5-4, the
radio will transmit at a frequency of 410 MHz, channel spacing of 12.5 kHz and at a power of
100 mW
. The transmission protocol and error method can also be selected on this page as
shown.
The frequency and bandwidth are con
fi
gured via the
Advanced Settings
menu. Note that,
the baud rate of the connection depends on the
Protocol
and
Bandwidth
settings as given
in Appendix 9.2.
Figure 5-4:
Con
fi
guring the UHF radio
1
Please note that, depending on your location, you may be prohibited from transmitting on certain
frequencies or at certain power levels.
57
