5.2. CONFIGURING THE ASTERX-U MARINE FG NTRIP CASTER
If the client rover receivers are con
fi
gured to send a GGA message to the caster (as was the
case in Figure 5-9), then their position will also be visible.
Figure 5-8:
Connecting as a client to the AsteRx-U MARINE Fg NTRIP Caster
On the NTRIP Client side
Rover receivers can connect to the NTRIP Caster by entering its IP address and Port as shown
in Figure 5-9. After clicking
‘
Ok
’
, the mount point source table will be
fi
lled and a mount point
can be selected. The user name and password can then be entered and within a few seconds,
the rover receiver should report an RTK
fi
xed position.
Figure 5-9:
Connecting as a client to the AsteRx-U MARINE Fg NTRIP Caster
61
