CHAPTER 4. CONFIGURING THE ALTUS NR3 AS A ROVER
Figure 4-7:
Con
fi
guring the base station receiver to call the rover receiver using
data call
Note that the Data Call feature only works when using batteries and will not work when the
Altus NR3 is connected to an external power supply.
Note that either the base or the rover can make the call. As long as one receiver is con
fi
gured
to be calling the other receiver which is accepting calls, a data connection using Data Call can
be established.
Step 3: Configure data output
Section 4.4.2 details the settings needed to output data
Step 4: Configure any additional settings
Section 4.5 details some additional settings that you may need
32
Summary of Contents for ALTUS NR3
Page 1: ...Altus NR3 User Manual ...
