SEON Trooper TR4, Installation And User Manual

Page: 33 / 90

Installation
700-0035 R004 2–13
2.10. Step 8: Hardware Installation Final Checklist
Harnesses (Camera, recorder, and accessories)
• Check for proper slack.
• Check that the cables and harnesses are properly secured.
• Check that sharp metal edges are not touching the cables or harnesses.
• Check that all the cables and harnesses are neat and tidy.
• Check that the connections are solid (no shorts).
Camera
• Check for tight mount.
• Check the internal harness connection.
• Check that the lid is properly seated on the gasket and secured tightly.
• Check the camera’s field of view.
DVR
• Check for tight mounting of hardware (lock box).
• Confirm that the cable grommet is properly installed.
• Check that all connections are tight.
System
• Install the fuses.
• Plug the video monitor into the DVR.
• Power up the system.
• Confirm that all the camera and audio sources are operating properly.
• Confirm that all the status indicators react properly.
• Hard drive power indicator
• Hard drive (lock and access)
• Voltage, temperature or system alarms
• Switch to temporary power by pressing the front panel Temporary Power
button with vehicle ignition turned OFF.
• Test the audio/video record.
• Test the audio/video playback.
• Configure the menus per the required end-user specifications.
2.11. EZN Decoy System
The EZN decoy system uses a live camera that does not have to be changed from
bus to bus, only the DVR must be removed. For decoy systems, the lock box and
all the harness and cables are installed the same as for a live system.