SEON Trooper TL2, Installation Manual

Page: 56 / 84

DVR Configuration Menus
4–6 700-0099 R008
4.3.1. Diagnostic Display Menu
Use the Diagnostic Display menu to set various diagnostic options to display on the
camera view overlays.
4.4. Alarms and Signals Menu
Use the Alarms and Signals menu to set the options and actions that occur when an
external alarm is received by the DVR. Usually, a driver-activated switch or other
external device causes the alarm.
Figure 4-5 Diagnostic Display Menu
Table 4 Diagnostic Display Configuration Items
Menu Item Description Value [Default]
Voltage Display Display the system input voltage. [On], Off
Time/Date Display Display the time/date display. [On], Off
HDD Size Display Display the hard drive size. [On], Off
% Full Display Display the percentage of the hard drive space used. [On], Off
Alarm Count Display Display the current alarm count (1 to 9). Alarm
count resets to 0 when the DVR is restarted.
[On], Off
Internal Temperature
Display
Display the ambient temperature inside the DVR. C (Celsius),
[F (Fahrenheit)], Off
Hard Drive Temperature Display the DVR hard drive temperature. Read
only.
C (Celsius),
[F (Fahrenheit)], Off
Figure 4-6 Alarms and Signals Menu