HD1Q Dome Camera with Angle Mount Shim
Quick Install Guide
© Seon Design Inc. | July 2017 | All rights reserved.
www.seon.com Part Number: 700-1094 R2
Camera Kit
:
• 1 HD1Q camera, including dome, gasket,
and connector cable
• 3 x No. 10 screws with washers
(1” length, part # 600-1012)
*
not used for shim installations
• 1 Security key (part # 645-1003)
• 1 Quick Install Guide
(part # 700-1084)
*
not used for shim installations
• 1 Drilling template (Part # 700-1090)
*
not used for shim installations
WARNING: Cable Compatibility
This camera requires a special Analog High Definition (AHD) cable - as indicated by a blue band
in front of the connectors. The AHD cable is not included with the camera kit. If you require an
AHD Cable, please contact our customer service department to place an order.
Specifications
Power Consumption
1 W (IR off); 2 W (IR on)
Operating Voltage Range
12 VDC ± 10% (powered by DVR)
Operating Temperature Range
-4 to 122ºF (-20 to 50ºC)
Resolution
720p
Infrared LED Lamps
12 LEDs (5mm)
Minimum Illumination
Color: 0.1 lux (F2.0)
B&W, IR LED on: 0 lux
Enclosure Size
Diameter : 3.74” (95 mm)
Height: 2.64” (67 mm)
Enclosure Material
Solid aluminum alloy
Dome
Impact-resistant polycarbonate, anti-glare,
scratch-resistant hardcoating, UV protected
Connector Cable Length
12” (30 cm)
Weight
0.52 lbs (0.24 kg)
Support
Service
If your HD1Q Series Dome Camera is to be returned to Seon Design for service, please call toll
free
1-877-630-7366
, or
604-941-0880
, and provide the model and/or serial number of your
unit. Ask for a Return Authorization (RA) number. An RA number allows the Service Technicians
to track your product when it comes in for service. Please display the RA number on the outside
of the package. ANY PRODUCT SENT TO SEON DESIGN WITHOUT AN RA NUMBER WILL BE
RETURNED.
Warranty
For full warranty information, go to www.seon.com/warranty.html.
Documentation
Copies of this guide can be found online at https://community.seon.com
Information in this guide is subject to change without notice.
B
C
D
1
2
A
B
A
C
D
3
4
5
File Last Saved Date: July-06-17 4:09:25 PM
File Name: HD1Q Install Images
6
TOLERANCES ARE:
REVISION
DIMENSIONS ARE IN MM
UNLESS OTHERWISE NOTED
NO DECIMAL PLACES
1 DECIMAL PLACE
2 DECIMAL PLACE
ANGLES
ARENA Tracking:
ENG:
DRAWN:
DATE
APPROVALS
SEON DESIGN INC.
111 - 3B Burbidge St.
Coquitlam, BC
Canada V3K 7B2
TEL: 604.941.0880
FAX: 604.677.6050
MANUFACTURING DESCRIPTION:
PART NUMBER:
SHEET
SIZE
A
1 of 1
SHEET:
THIRD ANGLE PROJECTION
COPYRIGHT SEON DESIGN INC., ALL RIGHTS RESERVED. THIS DOCUMENT MAY NOT BE DISCLOSED, OR REPRODUCED BY ANY MEANS WITHOUT THE WRI
TTEN CONSENT OF SEON DESIGN.
3
2
1
4
6
5
Shim Kit
(part # 020-1041):
• 1 shim angle mount (part # 665-1017)
• 2 x No. 8 screws
(2” length, part # 600-1015)
• 1 x No. 8 screw
(1.25” length, part # 600-1016)
• 3 x rubber washers
(part # 610-1001)
• 1 Quick Install Guide
(part # 700-1094)
Installation Kit Contents
The HD1Q camera with IR designed for interior use only. This Guide replaces the HD1Q Dome
Camera Quick Install Guide (part # 700-1084) for installations requiring the angle mount shim.
Step 6: Replace Camera Dome
1. Fit the dome onto the base, ensuring the foam IR boot around the camera lens is firmly
pressed against the inside of the dome.
2. Use the security key to tighten the captive screws.
