manualshive.com logo in svg

SEON Explorer TX8, Installation And Configuration Manual

Share
Download
SEON Explorer TX8 Installation And Configuration Manual Download Page 29

Explorer TX8

 

Installation Guide

700-0157 R001

 29

DVR Configuration Uploads

A configuration file is uploaded to a DVR when the DVR is first installed or when settings need to be 
changed on multiple DVRs in a fleet.

Configuration files can be uploaded at the DVR with a USB drive or over the network using vMax Web or 
vMax Commander applications.

To upload configurations with vMax Commander, see the vMax Commander Installation and 
Configuration Guide (700-0100).

USB Memory Device to DVR Configuration Upload

This method requires physical access to the DVR, an LCD Monitor, and a USB mouse.

To load a configuration update to the DVR, the USB memory device must be formatted by a Windows®-
based computer using the FAT32 file format.

To upload a configuration update on the TX8 via USB:

1

Copy the configuration file to the root of the USB memory device folder.

2

Power up the DVR using the vehicle ignition.

3

Connect the LCD monitor and USB mouse.

4

Insert the USB memory device into the USB port on the DVR.

5

In the DVR on screen display, double right click to open the menu, click Configuration, and then click 
System.

Important:

For USB uploading, the configuration file name can have no more than four characters. Example: 
*TX8.seon. 

Figure 36

Main Menu and Configuration Menu

Summary of Contents for Explorer TX8



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands