Quick Installation Guide
700-0047 R002
11
Recorder
•
Check for tight mounting of hardware.
•
Confirm that the cable grommet is properly installed.
•
Check that all connections are tight.
System
•
Install the fuses.
•
Plug the video monitor into the DVR.
•
Power up the system.
•
Confirm that all the cameras and audio sources are operating properly.
•
Confirm that all the status indicators react properly: Hard drive power indicator, Hard drive (lock and access), Voltage, temperature
or system alarms
•
Switch to temporary power by toggling the front panel
POWER
button with vehicle ignition turned OFF.
•
Test audio/video record and test audio/video playback.
•
Configure the menus per the end-user specifications. See
Explorer Premier Mobile DVR System User Guide
(p/n 700-0046).
•
Fasten the front cover and cable cover on the unit.
Inertia Sensor
The inertia sensor is a programmable accelerometer and impact sensor that can measure rapid acceleration or deceleration, abrupt
movement in bus braking or turning which can lead to complaints or injury claims. Video footage recorded with the sensor provides
valuable information for reviewing incidents and for training purposes as well. The inertia sensor has adjustable trigger thresholds which
can be wired to trigger alarms and signals. Contact your sales representative at Seon Design for inertia sensor options.
CAN Network
The Premier has a built-in CAN interface for connecting to J1939 compliant vehicle networks. J1939 is a Society for Automotive Engineers
(SAE) specification for network communication in a vehicle. Seon Design can factory program the Smart-Link module to accept ten signals
from the large selection available on a vehicle. Contact your sales representative at Seon Design to discuss the CAN interface.
Wireless Network
Contact your sales representative at Seon Design for wireless network options.
