![Seon Mobile Surveillance Explorer EX4 Plus 35 System Installation And User Manual Download Page 63](http://html1.mh-extra.com/html/seon-mobile-surveillance/explorer-ex4-plus-35-system/explorer-ex4-plus-35-system_installation-and-user-manual_1245348063.webp)
Configuring the DVR
700-0058 R001
3–25
Table 3-15
System configuration items
Menu Item
Description
Values
Default
ONE
-
TOUCH
DOWNLOAD
Use the
ONE
-
TOUCH
button without
a video monitor. See “4.5.2. U
•
ALARMS
downloads alarm
events only, starting with the
latest segment and working
backwards.
•
TODAY
downloads as much
information from today as
possible, starting with the latest
segment and working
backwards.
•
TIME
downloads as much
information as possible onto the
external device, starting with the
latest segment and working
backwards.
ALARMS
ALARM
BUZZER
Set to
ON
, the buzzer sounds when an
external alarm is received.
ON
,
OFF
OFF
VIDEO
LOSS
BUZZER
Set to
ON
, the buzzer sounds for 30
seconds if a camera signal goes away
while the DVR is operating.
ON
,
OFF
OFF
DISK
FULL
BUZZER
Set to
ON
, the buzzer sounds if the
REPEAT
RECORD
option is set to
OFF
and the hard drive is full.
ON
,
OFF
OFF
WATERMARK
VIDEO
Set to
ON
, an undetectable code is
embedded into the video that can
only be seen using a special viewing
application.
ON
,
OFF
OFF
PASSWORD
ENABLE
Set to
ON
, the front keypad is locked
out and requires a password. Enter
the password while pressing the
FULL
button. To use this function,
see “4.5.6. Using the LOCK Button”
on page 4–12.
ON
,
OFF
OFF
SET
PASSWORD
The password is 8 characters.
Uses the numbers 0 1 2 3 4 5 6 7 8.
88888888
LOAD
DEFAULTS
Three sets of default settings are
available that can be changed by the
user.
MEM
1
,
MEM
2
,
MEM
3,
SEON
(factory
default)
Not
applicable
SET
DEFAULTS
Three sets of default settings can be
changed and saved in the Set
Defaults menu. This means you can
call up different programming
features based on the use of the
vehicle.
MEM
1
,
MEM
2
,
MEM
3
Not
applicable