12.
Switching the
service mode
ON/OFF using the PIN code
To turn on the
service mode
using only the PIN code, turn the ignition ON, disarm the immobilizer by
entering the previously set PIN code holding the last programmed button for 10 seconds. If you successfully
managed to enable the
service mode
, the indicator on the dashboard will blink 5 times.
If you want to switch the
service mode
off, just enter the PIN code holding the last button until dashboard
indicator will blink once.
13.
Removing the ID transmitter or smartphone from the main unit’s memory with the
help of the installer – an alternative method of removing the lost ID transmitter
This procedure may be carried out only when the ignition is switched ON.
To remove all programmed ID transmitters and smartphones, you need to set the Program number 22999
(can only be performed with the installer – manually by pressing the main unit’s button or by programming
the device). Keep in mind that now all ID transmitters and smartphones which are in your possession need to
be programmed again into the main unit, after removing encryption keys from them.
14.
Information for the mobile application users
Every phone equipped with Android or iOS system with Bluetooth 4.2 or more recent version can be paired
with the immobilizer. Some smartphones with Bluetooth version 4.1 may also work with SEO CANblu, but
it’s required to update the phone software to the latest version. The immobilizer will permit you to drive your
vehicle only when the paired phone or ID transmitter is in range or the PIN code has been entered.
v 1.0 150219
