13
5.2.1
CALLING A PC STATION
To enable the CALL STATION feature, the third phone number must
be programmed with the telephone number of the PC station. The
reporting format for the third telephone must be selected for
ScanPro.
Enter the installer, or user menu, select CALL STATION and press
▲
#
. The system will set up using the previously programmed
information and call the PC station.
An example for the Call Station feature would be: If the PC was set
up with new system programming and is currently in the unattended
mode, the Call Station option could be used to “download” the new
program information.
5.2.2
ANSWER CALL
See page 17, Section 7.4, ANSWERING A CALL FROM THE
KEYPAD.
5.2.3
PROGRAMMING MODE
See page 15, Section 6.0, PROGRAMMING INSTRUCTIONS.
5.2.4
VIEW HISTORY
The View History option allows reviewing of the last sixty (60) events
that occurred to the system if both
EEPROM
s are installed. This
option is very useful in tracking system problems, since all events
are saved in a chronological order with time and date for each event.
Event number sixty (60) was the last event to occur. If a single
EEPROM
is used, the total amount of events available is twenty one
(21).
To View History, select the command from the installer's program-
ming menu or select as follows using a user's passcode:
[PPPP] +
▲
*
+
●
1
2
}
+
6
■
+
8
+
▲
#
To clear panel History, use Installer's code in the following sequence:
▲
*
0
}
+ [I I I I] +
▲
*
+
●
1
2
}
+
5
+
2
+
▲
#
To print panel History to a local printer, (using a DOB and Printer
must be enabled in location 30 of programming) use a user's
passcode in the following sequence:
[PPPP] +
▲
*
+
●
1
2
}
+
●
3
+
2
+
▲
#
Enter the Installer menu and select “View History”. The most recent
history event will be displayed immediately. Each history event will
be displayed in the following format.
SECTION 5: USER/INSTALLER MENUS
There are two menus available for the SC system, one for the
User and one for the Installer. Each menu has specific options
that are designed to aid in system operation and provide a
convenient method for changing system features.
5.1
USER MENU OPTIONS
The list of User selectable functions can be initiated by accessing the
User menu. To access the menu, enter the following key sequence:
[PASSCODE] +
▲
The first item of the menu will be displayed. The following is a list
of all User selectable menu items as they would appear in sequential
order on the keypad display. You can restrict the user from access-
ing any or all of these programming functions, refer to programming
item 67, User Attributes.
SET TIME/DATE
ANSWER CALL
SET ENTRANCE DELAY
CALL STATION
SET EXIT DELAY
EDIT ZONE NAME
EDIT USER CODE
To select a menu item, press the
▲
#
key.
To advance to the next item, press the
▲
key.
To exit the menu, press the
▲
*
key three to four times.
5.2
INSTALLER MENU OPTIONS
The list of Installer selectable functions can be initiated by accessing
the Installer menu. To access the menu, enter the following key
sequence.
▲
*
0
}
+
[INSTALLERS CODE] +
▲
The first item of the menu will be displayed. The following is the list
of Installer menu options in sequential order as they would appear
at the keypad.
SET TIME/DATE
EDIT ZONE NAME
SET ENTRANCE DELAY
EDIT USER CODE
SET EXIT DELAY
(These items are described in the users manual.)
CALL STATION
COPY PROM
ANSWER CALL
SEND
PROGRAMMING
RETRIEVE
VIEW HISTORY
To select a menu item, press the
▲
#
key.
To advance to the next item, press the
▲
key.
To back up to a previous item, press the
▲
key.
To exit the Installer menu, press the
▲
*
key three to four times.
