6
4.
While firmly holding the lockbox, the lockbox will display the READY light, indicating that it is
time to pull the shackle out of the lockbox. The shackle will come all the way out of the lockbox.
If you are not holding onto the lockbox when the shackle unlatches, it could fall to the ground.
Note: When using FUNC+1 to release the shackle, please wait for the motor to reset
itself and the red DND light to go out before re-inserting the shackle into the lockbox. To
reinsert the shackle, firmly press the shackle into the lockbox. The shackle is reversible,
so it does not matter which way you insert it. You may have to wiggle it slightly to get it
to go into the lockbox. Make sure you hear or feel a positive "click" that confirms the
shackle latch has engaged.
Last update to this topic: August 16, 2016.
How to Assign and Attach a Lockbox to a Listing
Assigning and attaching your lockbox to a listing is as easy as FUNC + 1, FUNC + 2, and FUNC + 3. Use the
following steps to open the key compartment, assign and attach your lockbox to a listing with your
SentriCard®:
1.
Insert your SentriCard® in the lockbox.
2.
Wait for the lockbox to display the CODE light, then type your PIN into the lockbox keypad and
press ENT.
Note: Do not remove your SentriCard® from the lockbox.
3.
Press FUNC + 1 and press the ENT button. The lockbox will release the shackle.
Note: Make sure you hold onto your lockbox when releasing the shackle because it will
come all the way out of the lockbox.
4.
Remove the shackle from the lockbox.
Note:Leave your SentriCard® in the lockbox.
5.
Press FUNC + 2 followed by either:
the numeric portion of the listing's street address;
or the numeric portion of the listing's MLS number
When you finish, press ENT. Leave your SentriCard® in the lockbox. If you made a mistake typing
in the number, simply repeat this step.
6.
Press FUNC + 3 followed by ENT. The key compartment will open. Place the dwelling key(s) in
the key compartment and close the door. When using FUNC + 3 to open the key compartment,
wait for the green READY light to go solid before closing the key compartment. This is also true
when using a SentriCard® to open the key compartment during a showing.
7.
You may now remove your SentriCard® from the lockbox.
8.
Hang the shackle over the door knob (or some other sturdy fixture that will allow the lockbox to
hang vertically).
