Sentera Controls FCMFF-R, Mounting And Operating Instructions

Page: 5 / 9

www.sentera.eu
MIW-FCMFX-R-EN-000 - 08 / 07 / 2020 5 - 9
back to the table of contents
STANDARDS
■
Low Voltage Directive 2014/35/EC:
►
EN 60529:1991 Degrees of protection provided by enclosures (IP Code)
Amendment AC:1993 to EN 60529
► EN 60730-1:2011 Automatic electrical controls for household and similar use -
Part 1: General requirements
■
EMC Directive 2014/30/EC:
►
EN 60730-1:2011 Automatic electrical controls for household and similar use -
Part 1: General requirements
► EN 61000-6-1:2007 Electromagnetic compatibility (EMC) - Part 6-1: Generic
standards - Immunity for residential, commercial and light industrial environments
EN 61000-6-3:2007 Electromagnetic compatibility (EMC) - Part 6-3: Generic
standards - Emission standard for residential, commercial and light-industrial
environments Amendments A1:2011 and AC:2012 to EN 61000-6-3
► EN 61326-1:2013 Electrical equipment for measurement, control and laboratory
use - EMC requirements - Part 1: General requirements
► EN 61326-2-3:2013 Electrical equipment for measurement, control and
laboratory use - EMC requirements - Part 2-3: Particular requirements - Test
configuration, operational conditions and performance criteria
■
WEEE 2012/19/EC
■
RoHs Directive 2011/65/EC
OPERATIONAL DIAGRAMS
AO1,
max range
AO1,
min range
60
40
100
0
rH Min range
-30
0
0
CO
2
Min range
CO
2
Max range
Max
Min
T Min range T Max range
rH Max range
AO1 [%]
70
100
2.000
rH [%] T [°C]
CO
2
[ppm]
CAUTION
The output changes automatically depending on the highest T, rH or CO
2
values, i.e.
the highest of the three output values controls the output. See the green line in the
operational diagram above.
FCMFX-R
INTELLIGENT MULTIFUNCTIONAL
SENSOR