No.15S103-01
39/65
STC-MBS510U3V / STC-MCS510U3V / STC-MBS322U3V / STC-MCS322U3V
Specifications and Use
’s guide
7
Camera Operation
This chapter describes camera operation.
7.1 ROI (Region of Interest)
This sets the ROI in order to output the selected image.
ROI will decrease the height of the image, while increasing the frame rate. This will also decrease the width pof the
image, but that does not affect the frame rate.
GenICam Parameters
Width
Integer Type
Horizontal(Pixel) size
Sets the maximum value less than (Width + OffsetX)
Height
Integer Type
Vertical(Line) size
Sets the maximum value less than ( OffsetY)
OffsetX
Integer Type
Horizontal(Pixel) offset
Default: 0
Setting interval: 4 pixel unit
OffsetY
Integer Type
Vertical(Line) offset
Default: 0
Setting interval: 4 line unit
The parameters defines as following chart.
(*) Width, Height,
OffsetX, OffestY’s setting interval is the same in Binning and Decimation.
Width
Height
OffsetX
OffsetY
ROI Region
Summary of Contents for STC-MBS322U3V
Page 1: ......
