Sentec SDM, Service Manual

Page: 17 / 93

2 The SenTec Digital Monitoring System (SDMS)
SenTec Digital Monitoring System 11
2 The SenTec Digital Monitoring
System (SDMS)
2.1 Components
The SenTec Digital Monitoring System (SDMS) comprises the following main
components:
Table 2 Components of the SDMS
REF Product
SDM
SenTec Digital Monitor
(including mains power cord)
SDMs with firmware version SMB SW-V08.00/ MPB SW-V06.00 are available
with/without factory preconfigured PO2-option.
VS-A/P/N V-Sign™ Sensor 2
(for PCO2, SpO2/PR monitoring)
OV-A/P/N OxiVenT™ Sensor
(for PCO2, PO2, SpO2/PR monitoring)
AC-YYY
Digital Sensor Adapter Cable
(to connect VS-A/P/N or OV-A/P/N to SDM; YYY=150,
250, 750 cm)
EC-MI Ear Clip
(to apply SenTec TC Sensors at earlobe of patients with mature/ intact skin)
MAR-MI
Multi-Site Attachment Ring MAR-MI
(to apply SenTec TC Sensors to patients with
mature/ intact skin)
MAR-SF
Multi-Site Attachment Ring MAR-SF
(to apply SenTec TC Sensors to patients with
sensitive/ fragile skin)
SA-MAR
Staysite™ Adhesive for the Multi-Site Attachment Rings
(attaches complementary
the MAR-SF/MI to the skin with an additional adhesive film)
GEL-04 Contact Gel
(contact liquid to apply SenTec TC Sensors to the patient)
MC-R Membrane Changer
(to change the membrane of SenTec TC Sensors)
MC-I Membrane Changer Insert
(separately bagged, single-use Inserts for the MC-R)
GAS-0812 Service Gas
(needed to calibrate SenTec TC Sensors)
V-STATS_CD
V-STATS™
(PC based Trend Data Download/ Analysis, Remote Monitoring, and
Configuration Software for SenTec Digital Monitors)
Note: The components listed above do not necessarily correspond to the scope of
delivery. Please refer to SenTec’s Webpage ( www.Sentec.com/products ) for
additional information and other available accessories.