manualshive.com logo in svg

SENSTAR Symphony 7.2 Series, User Manual

Share
Download
SENSTAR Symphony 7.2 Series User Manual Download Page 96

Symphony Client

Control

Description

Expand or collapse the camera controls.

Camera controls

Control

Description

Open or close the iris of the camera to adjust how much light

enters the lens of the camera.

Increase or decrease the brightness of the camera.

Adjust the focus of the camera.

Adjust the contrast of the camera.

Timeline

Timelines display the activities and alarms for a camera in the client interface.
You can display a timeline for each camera in the client interface and the timeline spans the current

day for that camera. You can click on the timeline to navigate to specific times or events in the

footage. A purple circle indicates your current position on the timeline.

Timeline colors

The client interface uses the following colors to mark events on the timeline.

Color

Event

Dark blue (#005670)

Activity

Dark green (#008080)

Video downloaded from the camera

Senstar Symphony User Guide

96

Summary of Contents for Symphony 7.2 Series

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands