manualshive.com logo in svg

SENSTAR Symphony 7.2 Series, User Manual

Share
Download
SENSTAR Symphony 7.2 Series User Manual Download Page 86

Symphony Client

View a camera

You can view a camera in each camera view panel in the client interface.
Before you begin:
• Add a camera to Symphony

• Open a floating or docked camera view
1.

In the client interface, click a camera view.

2.

In the device tree, click the camera that you want to view.

View a Thin Client

You can view a Thin Client device in the client interface.
Before you begin:
• Add a Thin Client device to Symphony
When you view a Thin Client device in the client interface, the Thin Client device opens in a new

floating view.
In the device tree, click the Thin Client device that you want to view.

View picture in picture

You can view live video in a nested window when viewing recorded video.
The picture-in-picture window displays live video while the main camera view panel displays

historical video.
1.

In a camera view panel in the client interface, perform one of the following tasks:
a) Right-click in the camera view panel and click 

Show Picture in Picture

.

b) Hover in the camera view panel and click the 

Picture in Picture

 icon.

2.

View recorded video in the main camera view panel to display live video in the picture-in-picture

window.

3.

To move the picture-in-picture window, click one of the icons in the corner of the picture-in-

picture window to move the window to that corner of the camera view panel.

Senstar Symphony User Guide

86

Summary of Contents for Symphony 7.2 Series

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands