manualshive.com logo in svg

SENSTAR Symphony 7.2 Series, User Manual

Share
Download
SENSTAR Symphony 7.2 Series User Manual Download Page 66

Symphony Server

Configure Crowd Detection

1.

In the server configuration interface, click 

Devices

 > 

Cameras

.

2.

Select the camera and click 

Edit

.

3.

In the 

Add-Ons

 list, turn Crowd Detection on and click 

Configure

.

Crowd Detection settings

Overview

Setting

Description

Analysis Resolution

Set the resolution for the camera on which Crowd Detection is

active.

Automatically Select Resolution

Based on Calibration

Select to automatically set the analysis resolution based on the

settings in the Calibration section.

Analysis FPS

Set the frames per second for the camera on which Crowd

Detection is active.

Simple Mode

Select whether to hide or display the advanced settings.

Processing Mask

Setting

Description

Drawing Mode

Select whether the paintbrush marks areas in the processing

mask image to include (Analyze) or exclude (Ignore).

Senstar Symphony User Guide

66

Summary of Contents for Symphony 7.2 Series

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands