manualshive.com logo in svg

SENSTAR Symphony 7.2 Series, User Manual

Share
Download
SENSTAR Symphony 7.2 Series User Manual Download Page 46

Symphony Server

4.

Click 

Yes

.

Licenses

License settings in Symphony allow you to view and refresh licenses.
You access the license settings on the Licenses tab in the server configuration interface.
The Properties section displays the characteristics of your Symphony Server license. The section

displays the date at which the license expires and the software version to which the license applies.
The Licenses in Farm section displays the video analytic licenses, the camera licenses, and the MAC

addresses of servers that are permitted in the server farm.
The Unlicensed Devices section displays the cameras on the network that do not have an associated

license.

Refresh licenses

You can refresh your licenses to check for newer versions from Xnet or to manually apply updates.
1.

In the server configuration interface, click 

Licenses

.

2.

Click 

Refresh Licenses

.

3.

Perform one of the following tasks:
a) To refresh the licenses from Xnet, select .

b) To refresh the license from a file, select 

Refresh license from file

, browse to the license

file or drag the license file into the window.

4.

Click 

OK

.

Show license XML

You can view the XML for your license.
1.

In the server configuration interface, click 

Licenses

.

2.

Click 

Show Raw License

.

Settings

Settings in Symphony allow you to configure servers, general settings, email notifications, health

monitoring, Enterprise Manager, updates, and backup and restore.
You access the settings on the Settings tab in the server configuration interface. The Settings tab

includes the Servers, General Settings, Notifications, Cloud Services, Maintenance, and Backup &

Restore tabs.

Servers

The Servers tab in the server configuration interface is the interface for configuring settings specific

to individual Symphony Server instances in the server farm.

Configure video storage for a server

You can configure how a Symphony Server stores and maintains video footage.
You can configure where Symphony stores video footage, how much video footage Symphony

stores, and under which conditions Symphony erases video footage. In addition, you can specify

backup locations for video footage.
1.

In the server configuration interface, click 

Settings

 > 

Servers

.

2.

Select a server and click 

Edit

.

Senstar Symphony User Guide

46

Summary of Contents for Symphony 7.2 Series

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands