manualshive.com logo in svg

SENSTAR Symphony 7.2 Series, User Manual

Share
Download
SENSTAR Symphony 7.2 Series User Manual Download Page 103

Symphony Client

Setting

Description

Panel Id

Select to display the panel ID in the name of the camera view

panel.

State Info Bar

Setting

Description

Farms

Select to display warning messages for farms in the notification

bar.

Servers

Select to display warning messages for servers in the notification

bar.

Cameras

Select to display warning messages for cameras in the

notification bar.

Storage

Select to display warning messages for video storage in the

notification bar.

Thin Clients

Select to display warning messages for Thin Client devices in the

notification bar.

Access Devices

Select to display warning messages for access control devices in

the notification bar.

Application Log

Setting

Description

Show verbose debugging

information

Select to display verbose debugging information in the

application log.

Show failed connection

attempts

Select to show failed connection attempts in the application log.

Dialog Preferences

Setting

Description

Reset

Click to reset all dismissed dialog boxes in the client interface.

Alarms settings

Setting

Description

Show Alarm Window (click OK

required)

Select to make the Symphony Client display a dialog box when an

alarm occurs.

Alarm Pop-up mode

Select how the Symphony Client displays alarm dialog boxes.

Senstar Symphony User Guide

103

Summary of Contents for Symphony 7.2 Series

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands