manualshive.com logo in svg

SENSTAR Symphony 7.2 Series, User Manual

Share
Download
SENSTAR Symphony 7.2 Series User Manual Download Page 101

Symphony Client

3.

Click 

Delete

.

4.

To confirm the deletion, click 

Yes

.

Settings

You can use the Symphony Client settings to customize the client interface.

View camera activity

You can view the activity for multiple cameras and open camera view panels for specific times from

each camera's timeline.
Viewing camera activity allows you to compare the timelines and track activity across multiple

cameras. You can open video from different times and cameras to view the complete video for an

activity or an alarm.
1.

In the client interface, click 

View

 > 

Activity For Cameras

.

2.

Specify the start and end dates for the activity you want to view and click 

Reload

.

3.

In the Pick Cameras list, select the cameras for which you want to view the activity.

4.

Use the 

Zoom In

 and 

Zoom Out 

 to set the correct resolution.

5.

Perform one of the following tasks:
• To open video in a single docked camera view panel each time you click on a camera

timeline, toggle the 

One Camera View

 button on.

• To open video in a new floating camera view panel each time you click a camera timeline,

toggle the 

One Camera View

 button off.

6.

Click a camera timeline to view video.

Customize the toolbar

You can add or remove icons from the toolbar.

1.

Click the down arrow in the toolbar.

2.

Click 

Add or Remove Buttons

 > 

Main Menu

.

3.

Click to show or hide the buttons, or click 

Reset Toolbar

.

Change timeline colors

You can change the colors that the Symphony Client uses in the timeline.
When you change the timeline colors, you also change the colors that the Symphony Client uses for

map icons.
1.

In the client interface, click 

View

 > 

Settings

.

2.

Click the 

Timeline Colors

 tab.

3.

Select the colors for each timeline event.

4.

Click 

OK

.

You can also reset the colors to the default Symphony colors at any time or use the classic colors

from Symphony 6.14.

Senstar Symphony User Guide

101

Summary of Contents for Symphony 7.2 Series

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands