SENSTAR FlexPS, Product Manual, Page: 49 / 94

Installing the FlexPS processor
FlexPS Product Guide Page 49
Installing the FlexPS processor
Do not remove the processor circuit card when installing the enclosure. There is a post mounting
kit available for securing the enclosure to a post. There is also a lockable mounting kit available for
applications in which the enclosure must be locked. The hardware required to mount the enclosure
on another type of surface is customer supplied.
Figure 56: shows a fence-mounted dual zone
processor with a single pass of sensor cable. The data and power cables are attached to the top of
the fence.
Figure 55: illustrates the FlexPS processor features and Table 4 includes feature
descriptions.
Figure 55: FlexPS processor features
15
16
17
18
19
1 2 3 4
5
6
7
9
10
11
12
13
14
8